User manual
MPTP | MPTP commands 88
4.6.10. Settings 2101–2105 –Information messaging
Defines the Automatic status messaging use. The INF-reply is defined in 2.2.4. Settings can be sent in
same message with limitation of 5 settings or total length of message 160 chacaters depending which is
met first.
Supported TWIG instruments and SW versions: Send Receive
Twig Protector SW CG1P.01.001.0000
•
Check Command format from 4.6.8
The special fields of the command are as follows:
Setting ID
Field Description Range
2101 Low battery Defines if the low battery message is sent.
Default 0 = disabled
0,25,50,75
2102 Docked Defines if the docked message is sent
default 0
0=disabled
1=enabled
2103 Un Docked Defines if the undocked message is sent
default 0
0=disabled
1=enabled
2104 Power on Defines if the power on message is sent
default 0
0=disabled
1=enabled
2105 Power off Defines if the power off message is sent
default 0
0=disabled
1=enabled
4.6.11. Settings 2201–2205 –TWIG SOS settings
Defines the General TWIG SOS settings . Settings can be sent in same message with limitation of 5
settings or total length of message 160 characters depending which is met first. CNF 2206 from
CG1P.01.020.0000 onwards
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Protector SW CG1P.01.001.0000
•