User manual

MPTP | MPTP commands 86
4.6.8. Settings 2001–2009 -General Settings
Defines the General instrument related settings. Settings can be sent in same message with limitation of
5 settings or total length of message 160 characters depending which is met first. Note that only
Setting ID’s from 2000 can be combined into set of 5. (CNF2008 requires FW CG1P.01.020.0000 or
later, CNF2009 requires CT1P.01.005.000 or later)
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Protector SW CG1P.01.001.0000
Twig Protector SW CT1P.01.004.0000
Command format
Command*
Part number*
Setting ID
SIM Card PIN Code
Setting ID
Generic application sound level
Setting ID
Lost GSM beep
Setting ID
White list usage
Setting ID
Service Center
4 1 5 1 4 1 4 1 4 1 1 1 4 1 1 1 4 1 1 1 4 1 24
?CNF _ 01/01 _ 2001 _ 4321 _ 2002 _ 3 _ 2003 _ 3 _ 2004 _ 3 _ 2005 _ +358801234567
The special fields of the command are as follows:
Setting ID
Field Description Range
2001 SIM Card PIN
Code
Defines the PIN code that is entered
automatically if SIM card has PIN request
active
4 digts
2002 Generic application
sound level
Defines the volume level, that is used to play
warning, notification & incoming call tones
1-5
2003 Lost GSM beep Defines the interval for BEP tone if the
roaming GSM network has been lost. Default
0 = disabled
0,20-65534 sec
2004 White list usage Defines how the white list is used, Default 0
0=disabled
1=SMS
2=CALL
3=SMS + Call
2005 Service Center Defines the number where generic Mobile
originated messages are send
0-24 numbers