User manual

MPTP | MPTP commands 85
Command format
Command*
Part number*
Setting ID
PWR On/Off mode
Start up time,
yymmddhhmmss
Pwr ON Interval, mins
Pwr OFF Delay, mins
Accelerometer sensivity
Accelerometer Duration
4 1 5 1 4 1 0…4 1 0…12 1 0…5 1 0…5 1 0…3 1 0…3
?CNF _ 01/01 _ 0303 _ 1 _ 081030123000 _ 60 _ 5 _ 3 _ 100
The special fields of the command are as follows:
Field Description Range
Setting ID Numeric identifier of the setting being
configured. In this case, the ID is 0303.
0000…9999
PWR On/Off
mode
Defines the operating mode of the timer
functions. Currently 0..1, Default =
0..4
Start up time,
yymmddhhmmss
Defines the initial start time when on/off
timer is used. If time is in the past or
invalid, the next starting time will be
calculated from next allowed time by
adding interval.
0…12
Pwr ON Interval,
mins
Defines the interval that is used to wake up
the unit if it is set to use the on off timer
and is not connected to charger
0…5
Pwr OFF Delay,
mins
Defines the delay that is used on turning
the uniot off when timer functions are
used. Common value used on timer,
accelerometer and charger disconnecting.
0..5
Accelerometer
sensivity
Defined the accelerometer sensitivity in
mG’s. The smaller the value the more
sensitive the unit is to turn on.
0..3
Accelerometer
Duration
Defines the duration of movement defined
by Accelorometer sentivity that is required
to turn on the unit.
0..3