User manual

MPTP | MPTP commands 84
not allowed to be chaged in the device by default and only factory preprogrammed values are used. This
applies specifically to Twig Discovery Pro range.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Discovery Pro SW CD??.02.000.00000
•
Twig Locator SW CL??.02.00.000
•
Twig Protector SW CG1P.01.001.0000
•
Command format
Command*
Part number*
Setting ID
GPRS IP adderss
GPRS port number
4 1 5 1 4 1 15 1 0…4
?CNF _ 01/01 _ 0302 _ 123.456.456.999 _ 1234
*) cf. section 3.1 for description of this field.
The special fields of the command are as follows:
Field Description Range
Setting ID Numeric identifier of the setting being
configured. In this case, the ID is 0302.
0000…9999
GPRS IP
Address
Defines the Backend Server IP address.
Please note limitations on use.
String of 15 digits
GPRS Port
Number
Defines the Backend Server port number.
Please note limitations on use
String of 0…4
difits
4.6.7. Setting 0303: Timer settings
This command is used to set the ON/OFF Timer and accelerometer values of the unit.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Locator SW CL??.06.004.000
•