User manual
MPTP | MPTP commands 83
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Discovery Pro SW CD??.02.000.00000
•
Twig Locator SW CL??.02.00.000
•
Twig Protector SW CG1P.01.001.0000
•
Command format
Command*
Part number*
Setting ID
APN
User name
Password
DNS1
DNS2
4 1 5 1 4 1 0…32 1 0…32 1 0…32 1 0…16 1 0…16
?CNF _ 01/01 _ 0301 _ internet _ username _ password _ 123.456.456.444 _ dom@in.com
*) cf. section 3.1 for description of this field.
The special fields of the command are as follows:
Field Description Range
Setting ID Numeric identifier of the setting being
configured. In this case, the ID is 0301.
0000…9999
APN Defines the Acces Point Name of the
internet service that is used with the GPRS
telematics. E.g. internet
String of 0…48
digits
User name Defines the username of the internet
service that is used with the GPRS
telematics. E.g. user@name.com ( in many
cases empty string )
String of 0…32
digits
Password Defines the password of the internet service
that is used with the GPRS telematics. E.g.
password ( in many cases empty string )
String of 0…32
digits
DNS1 Defines the primary GPRS network domain
name server that is required by some
networks. It can be either in text format or as
an IP address. Max length 16 characters
String of 0…16
DNS2 Defines the secondary GPRS network
domain name server that is required by
some networks. It can be either in text
format or as an IP address. Max length 16
characters
String of 0…16
4.6.6. Setting 0302: GPRS server settings
This command is used to set the backend Server IP adderss and port number needed for GPRS
telematics function. Please note, that there may be limitations on the programming and the values are