User manual
MPTP | MPTP commands 77
Please note, that some configurations require the unit to be restarted to get effect. In some devices the
restart can be done with a specific MPTP command. c.f. Reset terminal request 4.9
Command*
Part number*
Setting ID
…
4 1 5 1 4 1 …
?CNF _ 01/01 _ 0060 _ …
*) cf. section 3.1 for description of these fields.
Variations of the command are described in subsequent sections.
A special feature of persistent setting configuration commands is that several settings can be configured in
one message. This is done by adding several Setting IDs and their parameters in one message. For
example to configure GPS operating mode and GPRS server paramaters in one message the message
could look like following. ?CNF_01/01_0060_1_0302_123.456.456.999_1234.
4.6.1. Setting 0044: emergency numbers
This command is used setting the phone numbers to which emergency calls will be made and
emergency reports sent during the emergency cycle.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Locator SW 2.06
•
Command format
Command*
Part number*
Setting ID
Number of centers to set
1
st
emergency centre record
Slot number
Call
recipient
Calling
Em. report
recipient
Reporting
4 1 5 1 4 1 1 1 1 1 0…41 1 1 1 0…41 1 1 1
?CNF _ 01/01 _ 0044 _ 5 _ 3 _ +3581234567890 _ 1 _ +3581234567892 _ 1 _