User manual

MPTP | MPTP commands 76
Forced vibration Use of vibration upon arrival of the message:
- Use default setting for
vibration.
0 Do not use vibration.
1 Use vibration.
-, 0…1
Forced
lights
Use of lights upon arrival of the message:
- Use default setting for lights.
0 Do not use lights.
1 Use lights.
-, 0…1
Reminder
interval
Interval at which the message reception
effects will be replayed until the user
acknowledges the message. 0= disabled, no
reminder used ( default value)
0…65535
seconds
Clear condition Function defining how the message can be
cleared.
0= with any key
1=only from center ( receiving “empty” ?
OSM)
2= with END key
Default = 0
0…2
Message Message text to be shown on the receiving
terminal’s display.
any string with
supported
characters ( A-
Z, a-z, 0-9
If the message is sent in several parts, only the first part will contain the fields Forced tone … Reminder
interval. They will be omitted from subsequent parts, leaving up to 149 characters to be used for the
Message text.
NOTE, only don’t use ’Forced effects’ will be supported in the current range of devices. Thus message
will be format : “?OSM_01/01_0_Fire evacuate”. Additionally no scrolling text is supported. Text is
wrapped to screen automatically and concatenated to fit to screen w/o scrolling.
Supported characters on the text field are:
0-9; A-Z and a-z
4.6. Persistent setting configuring (?CNF)
CC → MTT
There are a multitude of persistent settings, many of which are specific to certain instrument models only.
Each persistent setting has a reference number. A persistent setting configuring MPTP command always
starts in the same way, with the Setting ID parameter determining the format of the rest of the command.¨