User manual

MPTP | MPTP commands 74
Command*
Part number*
Software version
GPS software
version
IMEI
GSM module
software
version
4 1 5 1 16 1 16 1 16 1 20
!SIR _ 01/01 _ CG1P.01.00
1.0000
_XXXXXX _ 352021009123456 _ MC55 Revision
04.00
*) cf. section 3.1 for description of these fields.
The special fields of the command are as follows:
Field Description Range
Software
version
Software version of device. string
GPS software
version
Software version of GPS module.
(Note that the possible underscore chars in
the SW version need to be replaced e.g.
with space)
string
IMEI IMEI code of the GSM module. valid IMEI codes
GSM module Software version of the GSM module. string
4.5.10. ON-SCREEN MESSAGE
An MPTP message emulating a Type 0 short message could be useful for providing quick instructions
or acknowledgements to the user of a terminal. To make things even better, MPTP could provide a
possibility for using various audiovisual effects to accompany such a message.
Supported Benefon/TWIG instruments and SW versions: Send Receive
TWIG Protector SW CG1P.01.044.0000
*
TWIG Protector Easy SW CG1E.01.044.0000
*
*Only “No forced effects”-mode supported
Sending
Mobile instruments do not support sending of this command.
Reception
Upon receiving this command, the receiving instrument will immediately show the message text on its
display. [For those who know about SMS types, this will be done as if the message was a Type 0 short
message.]