User manual
MPTP | MPTP commands 71
Command format
Length: 8 characters
Command*
Type
Service state
4 1 1 1 1
?ASR _ 0 _ 0
*) cf. section 3.1 for description of this field.
The special fields of the command are as follows:
Field Description Range
Type Type of reporting process to be deactivated,
as defined in section 4.5.5.
Currently only one type is available
0
Service state Activity of the process. Value 0 should be
used for deactivation; otherwise the process
will not be deactivated.
0…1
4.5.7. Automatic status report (!ASR)
MTT → CC
This automatic status report command is sent by a automatic status reporting process running on a
Mobile Telematics Terminal. The reporting process, with any of the types, can be set up remotely (cf.
section 4.5.5). The format of the report may be different depending on the type of the reporting process.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Discovery Pro SW CD1P.02.019.00000
•
Twig Discovery Pro (Tracer) SW CD1R.02.054.0000
•
Twig Discovery Pro (Navigation) SW CD1Q.02.054.0000
•
Twig Discovery Pro (Tracer, Navigation) SW CD1S.02.054.0000
•
Sending
This command can be sent by a automatic status reporting process. Cf. section 4.5.5 and 4.5.6 for more
information.