User manual
MPTP | MPTP commands 67
In Twig family this field contains ‘-‘ because
the data is not available.
Failure code Internal code indicating reason for battery
failure. ‘0’ indicates OK status.
This field is present on with first six status
codes. With rest of the status codes the field
is totally omitted from the message.
In Twig family this field contains ‘-‘ because
the data is not available.
0…99
Time of
sending
Date and time at which the report was sent.
Universal Coordinated Time (UTC) is used.
date and time in
format DD.MM.
YYYY_hh:mm:ss
4.5.4. General indication (!IND)
MTT → CC
This command is for indication general events which cause actions in the terminal. At first this message
is used for indicating digital input pin activating/stopping anchor tracking
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Locator SW 2.06
•
Sending
This command is sent automatically.
Command format
Length: 34...111 characters
Command*
Indication type
Time of sending
Pin number
Trigger type
Activity
Indication text
Center point
Center point time
stamp
4 1 1 1 19 1 1 1 1 1 1 1 1…20 1 24 1 19 1
!IND _ 0 _ 11.07.2003
_09:57:46
_ 5 _ 9 _ 1 _ Anchor
alarm on
_ N60.26.54,3_
E022.17.37,1
_ 11.07.2003
_09:00:46
_