User manual
MPTP | MPTP commands 66
*) cf. section 3.1 for description of these fields.
The special fields of the command are as follows:
Field Description Range
Status code Device status code:
001: battery low
002: connected to mains
003: disconnected from mains
004: battery too cold
005: battery too hot
006: unknown battery
007: power on
008: power off
009: poor satellite coverage
010: sensor not detected
011: battery temperature out of range
012: charging error
013: accessory battery low
Status codes 11 and 12 are available only in
Twig Discovery family.
001…013
Status
text
Textual description of device status, e.g.
‘Battery low’. Note that different units may
send different text
001: Battery low
002: Mains on / Docked
003: Mains off / Un docked
004: Battery cold
005: Battery warm
006: Unknown battery
007: Power on
008: Power off
009: Poor sat. cov.
010: No sensor
011: Temp. wrong
012: Charging error
013: Low Battery B2 ( number after
“B”corresponds to linked RF
button number
string of 0…15
chars
Battery
temperature
Current temperature of battery.
This field is present on with first six status
codes. With rest of the status codes the field
is totally omitted from the message.
In Twig family this field contains ‘-‘ because
the data is not available.
0.0…999.9
(degrees Celsius)
Battery
capacity
Current capacity of battery.
This field is present on with first six status
codes. With rest of the status codes the field
is totally omitted from the message.
0…65534
(mAh)