User manual
MPTP | MPTP commands 64
text report.
Some status codes can have a fixed,
predefined string associated with them. For
Trackbox, a status text can be defined for
codes 001…014. For other instruments, it
can be defined for codes 001…009.
Some products like Seraph have some
status codes, which have build in texts. See
below for those.
chars
Additional
text
The user may be allowed to type in
additional text to be sent with the report.
Such text is stored here. This field is used
string of 0…30
chars
Time of
sending
Date and time at which the report was sent.
Universal Coordinated Time (UTC) is used.
date and time in
format DD.MM.
YYYY_hh:mm:ss
4.5.2. Assistance request (!ASS)
MTT → CC
The assistance request command can be sent by a Mobile Telematics Terminal to inform a Control
Centre about a need for assistance. It is sent when the user selects a user interface function to initiate it.
Supported Benefon/TWIG instruments and SW versions: Send Receive
TWIG Protector SW CG1P.01.001.0000
•
Sending
• Protector :
This command can be manually sent by pressing the Assistance request keysy of the terminal. The
assistance request message will only be sent if the terminal’s assistance call functionality has been
programmed to include the sending. Corresponding button number will be added to data field at the
end of message. (Only in FW CG1P.01.018.0000 onwards)
Command format
Length: 86...90 characters
Command*
Part number*
Mode*
Battery level*
Position source*
Position format*
Position*
Time stamp*
Speed*
Heading*
Data*
4 1 5 1 4 1 4 1 3 1 1 1 24 1 19 1 7 1 6 1 6
!ASS _ 01/01 _ norm _ 075% _ gps _ 1 _ N60.26.54,3
E022.17.37,1
_ 03.11.2003
10:29:01
_ 142km/h _ 063deg _ 15
*) cf. section 3.1 for description of these fields.