User manual

MPTP | MPTP commands 63
Supported Benefon instruments and SW versions: Send Receive
TWIG Locator SW CL1L.06.008.0000
Sending
TWIG Locator :
A report can be sent automatically when an event for which such functionality has been
programmed occurs.
In case of an I/O event, the report is sent to the first Alert number configured as described in the
user manual.
Command format
Note that there are different command formats for different products, applications and uses.
Length: 112...160 characters
Command*
Part number*
Mode*
Battery level*
Position source*
Position format*
Position*
Time stamp*
Speed*
Heading*
4 1 5 1 4 1 4 1 3 1 1 1 24 1 19 1 7 1 6 1
!STA _ 01/01 _ norm _ 032% _ gps _ 1 _ N60.26.54,3_
E022.17.37,1
_ 11.11.2008
_09:57:46
_ 142km/h _ 275deg _
Status code
Status text
Additional text
Time of sending
3 1 0…15 1 0…30 1 19
001 _ STA01 _ LOW _ 11.11.2008
_09:58:03
*) cf. section 3.1 for description of these fields.
The special fields of the command are as follows:
Field Description Range
Status code Status code for the report.
The code is either selected by the user at the
time of sending, or automatically selected if the
report was sent by the occurrence of an event.
000…999
Status Predefined text to be sent with the status string of 0…15