User manual
MPTP | MPTP commands 60
4.4.1. Emergency report with text (!EMG)
MTT → CC
This emergency report command may be sent by a Mobile Telematics Terminal during the emergency
cycle. It may contain some predefined text in addition to position information.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Discovery SW CD1D.02.002.00069, CD2D.02.011.00000
• •
Twig Hunter SW CD1H.02.002.00000 Hunter 1.0.3
• •
Twig Discovery Pro SW CD1P.02.019.00000
•
Twig Discovery Pro (Tracer) SW CD1R.02.054.0000
• •
Twig Discovery Pro (Navigation) SW CD1Q.02.054.0000
• •
Twig Discovery Pro (Tracer, Navigation) SW CD1S.02.054.0000
• •
Twig Locator SW 2.06
•
Twig Protector SW CG1P.01.001.0000
•
Sending
This command may be automatically sent during the emergency cycle.
Reception
• Esc! :
Upon receiving an emergency report command, Benefon Esc! will notify the user and update the
position it has stored for the terminal which sent the report. The text in the message, if any, is also
displayed.
• Twig Discovery, Twig Hunter :
Upon receiving an emergency report command, Twig Discovery or Twig Hunter will notify the user
and update the position it has stored for the terminal which sent the report.
Command format
Length: 87...151 characters
Command*
Part number*
Mode
Battery level*
Position source*
Position format*
Position*
Time stamp*
Speed*
Heading*
Text
4 1 5 1 4 1 4 1 3 1 1 1 24 1 19 1 7 1 6 1 0…60
!EMG _ 01/01 _ emer _ 075% _ gps _ 1 _N60.26.54,3_E0
22.17.37,1
_ 11.07.2003_
09:57:46
_ 005km/h _ 063deg _ ×
*) cf. section 3.1 for description of these fields.