User manual

MPTP | MPTP commands 55
Sending
This command can be sent by a condition check process. Cf. section 4.3 for more information.
Command format
Length: 94...111 characters
Command*
Part number*
Trigger type
Interval
Service state
Mode
Battery level*
Position source*
Position format*
Position*
Time stamp*
4 1 5 1 1 1 1…5 1 1 1 4 1 4 1 3 1 1 1 24 1 19 1
!CIN _ 01/01 _ 0 30 _ 1 _ emer _ 075% _ gps _ 1 _ N68.28.43,9
E027.27.02,4
_ 28.10.2003
14:36:35
_
Speed*
Heading*
Queries missed
Passcode
7 1 6 1 1…5 1 0…4
081km/h _ 114deg _ 1 _ 8725
*) cf. section 3.1 for description of these fields.
The special fields of the command are as follows:
Field Description Range
Trigger type Trigger type of the condition check process
which sent the report. Currently only 0.
0…3
Interval Query interval of the process which sent the
report, in full minutes.
1…65536 (min)
Service state Activity of tracking process. Value 1 should
be used, as the tracking process is active.
0…1
Mode Reason for sending the report:
norm: the user confirmed the query
norm
Queries
missed
Number of queries the user has failed to
confirm within the 45-second period.
This counter is reset whenever a query is
properly confirmed.
Currently only 0
0…65535