User manual

MPTP | MPTP commands 52
Message number The message number of the report and the
total number of messages to be expected.
The first number is the message’s order
number and the number after the slash
character is the total number of messages to
be expected.
If the message order number or total number
of messages becomes more than 9999,
0000 is used in the field.
If the total number of messages cannot be
calculated 0000 is used in the field. This
case happens with tracking which does not
have stop trigger.
0000….9999 /
0000….9999
For locally set up complex tracking processes, the Command field can be changed to hold !TRI instead
of !TRG to indicate the local origin of the process. This is done in all versions of Track Pro. Otherwise, the
command is formatted as described above.
4.2.2.4. Real time complex report: tracking triggers (!TRR)
MTT CC
This tracking report command is sent by a real time complex tracking process running on a Mobile
Telematics Terminal. The tracking process, with any of the trigger types, can either be set up remotely
(cf. section 4.2.1.5). Different trigger types can have somehow different reports.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Discovery Pro SW
Twig Discovery Pro (Tracer) SW
Twig Discovery Pro (Navigation) SW
Twig Discovery Pro (Tracer, Navigation) SW
Twig Protector SW CG1P.01.013.0000
TWIG Locator SW CL1L.06.014.000?
Sending
This command can be sent by a real time complex tracking process. Cf. section 4.2.1.5 for more
information.
Command format