User manual

MPTP | MPTP commands 49
Command format
Length: 90...104 characters
Command*
Part number*
Trigger type
Service state
Mode*
Battery level*
Position source*
Position format*
Position*
Time stamp*
4 1 5 1 1 1 1 1 4 1 4 1 3 1 1 1 24 1 19 1
!TRS _ 01/01 _ 1 _ 1 _ norm _ 075% _ gps _ 1 _ N68.28.43,9
E027.27.02,4
_ 20.10.2003
14:37:09
_
Speed*
Heading*
Message number
7 1 6 1 3…9
142km/h _ 114deg _ 3/10
*) cf. section 3.1 for description of these fields.
For descriptions of the special fields, cf. section 4.2.2.1.
4.2.2.3. Complex report: tracking triggers (!TRG)
MTT CC
This tracking report command is sent by a complex tracking process running on a Mobile Telematics
Terminal. The tracking process, with any of the trigger types, can be set up remotely (cf. section 4.2.1.4).
Different trigger types can have somehow different reports.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Discovery Pro SW CD1P.02.019.00000
Twig Discovery Pro (Tracer) SW CD1R.02.054.0000
Twig Discovery Pro (Navigation) SW CD1Q.02.054.0000
Twig Discovery Pro (Tracer, Navigation) SW CD1S.02.054.0000
Twig Hunter SW CD1H.02.002.00000 Hunter 1.0.3
Twig Locator SW 2.06
Twig Protector SW CG1P.01.001.0000
Sending
This command can be sent by a complex tracking process. Cf. section 4.2.1.4 for more information.