User manual
MPTP | MPTP commands 47
Twig Protector SW CG1P.01.001.0000
•
Sending
• Track One, Track Pro, Trackbox, TrackKeeper, Seraph, Twig Locator :
This command can be sent by a tracking process remotely set up by a Control Centre. Cf. section
4.2.1.1 for more information.
• Esc! :
This command can be sent by a tracking process remotely set up by a Control Centre. The process
can also be set up locally; this done by selecting the Send tracking function from the Friend Find
or Commander application.
Reception
• Esc! :
Upon receiving a tracking report command, Benefon Esc! will notify the user and update the
position it has stored for the terminal which sent the report.
• Twig Hunter :
Upon receiving a tracking report command, Twig Hunter will notify the user and update the position
it has stored for the terminal which sent the report.
Command format
Length: 90...104 characters
Command*
Part number*
Trigger type
Service state
Mode*
Battery level*
Position source*
Position format*
Position*
Time stamp*
4 1 5 1 1 1 1 1 4 1 4 1 3 1 1 1 24 1 19 1
!TRC _ 01/01 _ 1 _ 1 _ norm _ 075% _ gps _ 1 _ N68.28.43,9
E027.27.02,4
_ 20.10.2003
14:37:09
_
Speed*
Heading*
Message number
7 1 6 1 3…9
142km/h _ 114deg _ 3/10
*) cf. section 3.1 for description of these fields.