User manual
MPTP | MPTP commands 23
Command format
Length: 87...151 characters
Command*
Part number*
Mode*
Battery level*
Position source*
Position format*
Position*
Time stamp*
Speed*
Heading*
Data
4 1 5 1 4 1 4 1 3 1 1 1 24 1 19 1 7 1 6 1 0…60
!LOC _ 01/01 _ norm _ 075% _ gps _ 1 _ N60.26.54,3_
E022.17.37,1
_ 11.07.2003_
09:57:46
_ 005km/h _063deg _ ×
*) cf. section 3.1 for description of these fields.
The Data field is optional and can be omitted. Some TWIG instruments use it to hold textual information
about the cause of failure when unable to acquire a position fix.
4.1.3. SRD Beacon reports
MTT → CC
The position report command can be added with information on SRD Beacons heard by TWIGdevice
having SRD transceiver. The information can be added to the end of any MPTP message. The presence
of such data is indicated in the position format information in the beginning of the message. C.F 3.1
Supported TWIG instruments and SW versions: Send Receive
Twig Protector SW CT1P.01.014.0000
•
Command format
Length: 87...151 characters
Command*
Part number*
Mode*
Battery level*
Position source*
Position format*
Position*
Time stamp*
Speed*
Heading*
Data
4 1 5 1 4 1 4 1 3 1 1 1 24 1 19 1 7 1 6 1 0…60
!LOC _ 01/01 _ norm _ 075% _ gps _ 3 _ N60.26.54,3_
E022.17.37,1
_ 11.07.2003_
09:57:46
_ 005km/h _063deg _ ROO
M1.5.-
101.3
5.25_
ROO
M3.5.-
102.3
5.29