User manual
MPTP | MPTP commands 22
4.1.2. Position report (!LOC)
MTT → CC
The position report command is sent by a Mobile Telematics Terminal as a sole response to a position
request command from a Control Centre. It is also used by Benefon Esc! instead of the manual position
report command
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Discovery SW CD1D.02.002.00069, CD2D.02.011.00000
• •
Twig Hunter SW CD1H.02.002.00000 Hunter 1.0.3
• •
Twig Discovery Pro SW CD1P.02.019.00000
•
Twig Discovery Pro (Tracer) SW CD1R.02.054.0000
• •
Twig Discovery Pro (Navigation) SW CD1Q.02.054.0000
• •
Twig Discovery Pro (Tracer, Navigation) SW CD1S.02.054.0000
• •
Twig Locator SW 2.06
•
Twig Protector SW CG1P.01.001.0000
•
Sending
• Track One, Track Pro, Trackbox, TrackKeeper, Seraph, Twig Discovery Pro, Twig Locator :
This command can only be sent as an automatic response to a position request.
• Esc! :
This command can be sent as an automatic response to a position request. It can also be manually
sent by selecting the Send update function from the Friend Find or Commander application.
• Twig Discovery :
This command can be sent as an user accepted response to a position request. It can also be
manually sent by selecting the Send my position function from the Twig Navigation application.
• Twig Hunter :
This command can be sent as an automatic response to a position request. It can also be manually
sent by selecting the Send my position function from the Twig Hunter or Twig Navigation
application.
Reception
• Esc! :
Upon receiving a position report command, Benefon Esc! will notify the user and update the
position it has stored for the terminal which sent the report.
• Twig Discovery, Twig Hunter :
Upon receiving a position report command, Twig Discovery will notify the user and update the
position it has stored for the terminal which sent the report.