User manual

MPTP | MPTP commands 104
Check Command format from 4.6.8
The special fields of the command are as follows:
Setting ID
Field Description Range
2800 Amber Alert mode Defines the mode of function. Only 0-2 are
currently in use.
Default 0
0=OFF,
1=Interactive,
2=local,
3=remote,
4=automatic
2801 Amber Alert Type Defines the activation mode whether SMS
or voice call. Default 1
1=SMS,
0=CALL
2802 Amber Alert /
Condition Check
ACK
Defines in REMOTE mode if Acknowledge
is needed. N/A currently
0= NO
1=YES
2803 Amber Alert
Activation
Number
Defines the number that is used for Amber
alert Activation whether SMS or Call is
used
0-24 numbers
2804 Amber Alert
Deactivation
Number
Defines the number that is used for Amber
alert Deactivation whether SMS or Call is
used
0-24 numbers
2405 Amber alert Pre-
alarm time.
Defines Prealarm time to Acknowledge in
the handset the Amber Alert timer to clear
alarm
1..5 minutes
2806 Amber Alert
Automatic mode
time
Defines automatic mode time. N/A
currently
X..XX minutes
4.7. Persistent setting request (?PSR)
CC MTT
There are a multitude of persistent settings, many of which are specific to certain instrument models only.
Each persistent setting has a reference number. With a persistent setting request MPTP command Control
centre can check the current settings of the MTT.
Supported Benefon/TWIG instruments and SW versions: Send Receive
Twig Protector SW CG1P.01.001.0000
Reception
Upon receiving a persistent setting request command the terminal will send a persistent setting report
containing the setting values of requested settings. Cf. 4.8 for more information about persistent setting
report.