Owner`s manual

72 MAIN MENU: SETTINGS
CAR KIT ENVIRONMENT
In this menu you can set one of the environments
to be the default environment for the car kit. Each
time when you connect the phone to a car kit, the
default car kit environment will be turned on auto-
matically. As you disconnect the phone from the
car kit, previously used environment will be turned
on.
Select
Car kit and press - CHANGE. Highlight the
desired environment with
n and press - OK.
If you do not want to use any specific environment
with the car kit, select the option
None. This way,
the environment will not be changed automatically
when the phone is connected to the car kit.
If you want to use some other environment than
the default car kit environment while the phone is
connected to the car kit, you may select another
environment in the
Quick menu.
CREATING NEW ENVIRONMENT
To create an environment of your own, select New.
At most two additional environments can be made.
Naming the environment
You can change the name of an environment,
which you have created yourself.
1. Select
Name and press - CHANGE.
2. Key in a new name with alphanumeric keys and
press
- OK.
Changing base environment
You can select which one of the default environ-
ments your new environment is based on. The ini-
tial values of all the environment settings will be
copied from that environment.
1. Select
Based on and press - CHANGE.
2. Select the base environment and press
- OK.
3. When you are finished, press
. DONE. If you
have made any changes to the environment,
you will be asked if you want to save or discard
them. Make your choice and press
- OK.