Owner`s manual

70 MAIN MENU: SETTINGS
can customize these environments to your own
needs, if you so desire.
You can turn on a specific environment in the
Quick menu. For further information about it,
please see the instructions in the chapter Quick
menu, Selecting an environment.
The environment you are currently using is shown
in stand-by mode.
Press
- SELECT to open the Environments menu
from
Settings.
EDITING NORMAL ENVIRONMENT
To view or adjust the normal environment, select
Normal and press - SELECT.
When you are finished, press
. DONE. If you have
made any changes to the environment, you will be
asked if you want to save them. Make a selection by
pressing
. NO or - OK.
Renaming the environment
The default environments, Normal, Silent, Discreet,
Noisy
and Night, cannot be renamed.
Editing incoming call, alarm,
messages or calendar settings
Select either Incoming call, Alarm, Messages or Cal-
endar
, and press - SELECT. The current environ-
ment settings for the chosen option are displayed.
Setting tone
1. Select Tone and press - CHANGE.
2. You will hear samples of each tone listed as you
scroll them with
n. Make a selection and press
- OK.
Setting volume
1. Select Volume and press - CHANGE.
2. Use
n to set the volume level. You can also set
it to zero level, i.e. totally silent.
3. Press
- OK when done.
Volume level can also be set by pressing
> and <
when the Volume menu item is selected.
Setting ringing mode
Ringing mode is not available in message setting.