Owner`s manual

BRIEF OVERVIEW OF PHONE USE: ACTIVE CALL 35
SELECTING A CALL
When there are several simultaneous calls, you can
make one of them active as follows:
1. Use
n to select a call and press - SELECT.
2. Press
- OK to select Select. The selected call
will be made active, while the previously active
call is put on hold.
You can also make a call active directly by selecting
it with
n and pressing l.
ENDING A CALL
1. Use n to select a call and press - SELECT.
2. Use
n to select End and press - OK. The se-
lected call will be ended.
PICKING A WAITING CALL
Use this function if you wish to pick up an incom-
ing call and put the currently active call on hold.
When a call is in progress and you have another in-
coming call, the network will notify you of a call
waiting. The waiting call will also appear in the ac-
tive call display, accompanied by a
P symbol.
To pick up a waiting call, do as follows:
1. Use
n to select the waiting call and press - SE-
LECT
.
2. Press
- OK to select Pick. The waiting call will
be made active, while the previously active call
is put on hold.
You can also pick up a waiting call directly by se-
lecting it with
n and pressing l.
Please note that in order to use this function, the
Call waiting option must be turned on in the GSM
menu
, under Network services.
DROPPING A WAITING CALL
If you do not want to pick up a waiting call, you can
drop it as follows:
1. Use
n to select the waiting call and press - SE-
LECT
.
2. Use
n to select Drop and press - OK. The wait-
ing call will be dropped, and the caller will
hear a busy signal.