Owner`s manual

QUICK START: WHAT TO DO FIRST 15
3. Close the holder by pushing it towards the
phone. Slide the holder back to the left until it
locks.
After inserting the SIM card, fit the battery back
into place.
Inserting the rubber seal
Installing the rubber seal is optional. Please note,
however, that the phone is splash proof only when
the rubber seal is inserted correctly in the phone.
First make sure that the battery has been removed.
1. Place the rubber seal so that it lies in the bot-
tom of the battery hole.
2. Fit the rubber tab into the recess in the upper
left corner.
Cap
Rubber tab