Owner`s manual

138 GPS MENU: REQUESTING AGPS
the services. The services are only available from
certain service providers.
REQUESTING AGPS
You can request the service provider to send you
assisted GPS information. Before sending the re-
quest, make sure, the AGPS settings are correctly
done. For further information, please see the chap-
ter Main menu, Settings, GPS, AGPS.
1. Press
- GPS to enter the GPS menu.
2. Use
n to select Request AGPS and press - SE-
LECT
.
3. Confirm the request by pressing
- OK.
UPDATING POSITION
You can make the GPS receiver to update your po-
sition at once.
1. Press
- GPS to enter the GPS menu.
2. Use
n to select Update position and press -
OK.
SKIPPING ROUTE POINT
Use this option if your current destination is a
route and you want to skip a route point.
1. Press
- GPS to enter the GPS menu.
2. Use
n to select Skip route point and press - SE-
LECT
.
3. Select your next route point by scrolling the list
and highlighting the point with
n. Press - SE-
LECT.
CLEARING DESTINATION
When you no longer want to use a point as destina-
tion, do as follows:
1. Press
- GPS to enter the GPS menu.
2. Use
n to select Clear destination. Press - OK.
After clearing the destination, the navigator pages
will no longer provide any guidance in navigating
to a destination.
You do not need to clear the destination to be able
to select a new destination.
Destination can only be cleared when a point is be-
ing used as destination.