Owner`s manual

132 GPS MENU: FRIEND FIND
Please note that a new, unauthorized friend point
is also automatically created whenever you receive
a request or an update from a phone number that
has not previously been specified as a friend point.
SETTING DESTINATION
You can set any friend point to be used as destina-
tion. Benefon ESC! will then give you directions to
navigate to that point.
1. Select a friend point from the list and press
-
SELECT.
2. Select
Set as destination and press - OK.
3. If the position of the friend point is unknown
(i.e. no updates have been received from it
yet), the text
Position unknown will be shown
and destination will not be changed.
Please note that a friend point’s position may
change while you are using it as destination. In this
case, navigating will be automatically continued to-
wards the new, updated position.
SETTING POSITION
You can trick the phone into believing that the se-
lected friend point is your current position. This is
useful e.g. when you want to use the map while
conserving the battery by not having the GPS on, or
when you want to speed up the initial position cal-
culations of the GPS.
1. Select a friend point from the list and press
-
SELECT.
2. Select
Set as position and press - OK.
This option is only available when the GPS module
is not active or has no valid position.
AUTHORIZING
When you receive a request from another phone,
asking that you send a position update or start
sending tracking updates, you will usually be asked
for a confirmation.
Sometimes, however, you may want to make a
friend point authorized so that all requests from
that friend’s phone number will be automatically
responded.