Owner`s manual

GPS MENU: ROUTES 127
route, and choose whether you want to save or
discard it.
3. As a default setting, the route name will consist
of the first and last waypoint on the route.
•Select
Name and press - CHANGE if you
wish to edit the name.
•Use
. CLEAR to delete characters, and
alpha-numeric keys to enter new ones.
4. You are asked if you want to save the route.
Make a selection by pressing
. NO or - OK.
SETTING DESTINATION
You can set a route to be used as destination. Bene-
fon ESC! will then give you directions to navigate
the route, from point to point.
1. Select a route from the list. Press
- SELECT.
2. Select
Set as destination and press - OK.
3. You will enter a menu where you can choose
the starting point and travelling direction you
wish to use when navigating.
Changing starting point
•Select Starting point and press - CHANGE.
•Select a waypoint and press
- OK.
Changing travelling direction
•Select Travelling direction and press -
CHANGE.
•Travelling direction can be chosen from
two options, where the direction is
implied by the first and last point on a
route. Make a choice and press
- OK.
4. When you are finished, press
. DONE.
VIEWING THE MAP
1. Select a route from the list. Press - SELECT.
2. Select
Show on map and press - SELECT.
3. You will see a map, with the first waypoint of
the selected route shown in the middle.
•Use
n to move between the waypoints.
•Use
+ and § to zoom in and out.
•Use
1, 2, 3, 4, 6, 7, 8, and 9
to scroll the map.