Owner`s manual

GSM MENU: NETWORK SERVICES 117
INCOMING CALLS
The second section of the menu allows you to set
barrings that concern incoming calls only.
Bar all incoming calls
With the All option you can only make calls, not re-
ceive them. This sub-menu functions as the Bar all
outgoing calls feature described above.
Bar incoming calls when roaming
With the When roaming option you can receive calls
only when you are within the area of your own net-
work operator.
You may need this option when you are roaming
because many network operators and service pro-
viders charge for receiving calls when you are
roaming.
This sub-menu functions as the Bar all outgoing
calls feature described above.
CLEAR BARRINGS
Use this option if you wish to clear all call barrings
at once. Press
- OK, enter the network code and
press
- OK again.
Call waiting
If a call is in progress and you have an incoming
call, the network will notify you if you have the call
waiting option turned on. Call waiting is a network
feature.
1. Press
- SELECT to select Call waiting.
2. You will see a checkbox that indicates whether
call waiting is on or off.
3. Press
- CHANGE to turn the option on or off.
Call cost
This menu contains information on the call charg-
es. It also provides options for resetting the charge
counter and setting a charge limit for calls. These
options are useful especially when the user is not
the subscriber.
Call cost is a network feature. In order to use some
of these options, you need to have a specific SIM
card as well as a PIN2 code. For further informa-
tion on these charging services, please contact
your network operator.
If the call cost feature is not enabled on your SIM
card, you cannot enter the
Call cost menu at all.