Owner`s manual

GSM MENU: MESSAGES 101
•By selecting Send, you can send the message
without saving a copy of it for yourself.
•By selecting
Send and save, you can send the
message and also save
it to your SIM card. The
message is stored into the outbox. The original
message sent to you is still kept in the inbox.
However, if there is not enough free memory
space to save the message,
No free memory will
be displayed and you will return to previous
menu level. The message will not be sent either.
In this case you may delete some old messages to
make some free memory space or select the
Send
option.
•By selecting
Send with position, you can send a
message to the operator with a request for posi-
tion information.
The default destination number for the reply mes-
sage is the number from where the original mes-
sage was sent. If the number in question is stored
in the phone book, the name of the caller is dis-
played instead of the number.
To change the number, press
. CLEAR for a few
seconds. You can then either key in another num-
ber, or press
- SEARCH to look for the desired
number in the phone book.
To send the message, press
- SEND.
If there is SMS transmission failure, the text
Error
in sending
will be displayed. In this case, make sure
the receiver’s phone number (including prefix)
and the message box number are correct and there
is enough network coverage for radio communica-
tion.
Postponing the message
By selecting Postpone, you can save the message
(as a draft) without immediately sending it to any-
one. If you wish to finish or send the message later,
you can recall a postponed message through
Write
message
menu.
Forward
Use this option if you wish to send the selected
message to a new receiver. Forwarded messages
are not stored as extra copies into SIM card.
Key in another number, or press
- SEARCH to
look for the desired number in the phone book.
To send the message, press
- SEND.