User`s manual

KEYS, LEDS AND OUTER PARTS
9
KEYS, LEDS AND OUTER PARTS
Note that available keys may depend on the
Locator version in use.
Turning TWIG Locator on and off
You can turn TWIG Locator on by pressing the
power on/off key. As a sign of starting-up, all
three LED indicators turn on for a couple of
seconds. After that the status LED continues
blinking for about 20 seconds.
To turn the device off, press the power on/off
key again.
Note that turning Locator from power key
stops verticality sensor from operating, as
well as cancels all tasks set for timer. These
operations will be reset automatically when
the device is turned back on.
If you wish to keep timer tasks and verticality
sensor operation active while your device is
powered off, use power off timer to shut down
the device.
Status LED
GSM LED
GPS LED
Anchor
button
Emergency
button
Power on/
off button
Bottom connector for
charger (round hole
on the left)
Bottom connec-
tor for USB-cable