User`s manual

GETTING STARTED
7
GETTING STARTED
Inserting SIM-card
1. Remove the back cover and battery as
described in
removing battery and back cover on
page 8 .
2. Slide the SIM card holder to the right. Lift
the holder into an upright position.
3. Insert SIM card into the hole. Check that
the cut corner is placed at the bottom left
corner.
4. Close the holder. Slide the holder back to
the left until it locks.
Inserting battery and back cover
1. Place the bottom tabs of the battery into
the small hollows at the bottom of the
device.
2. Push the battery towards the device until it
locks into place. Ensure that the battery
release catch is positioned upwards.
3. Place the back cover towards the device,
bottom first.
4. Press the cover to the device until it locks in
place at the top.
Back cover
SIM-
card
Short
back side
screws
Long front
side screws
SIM-card holder
Front cover