User`s manual

CONFIGURATING LOCATOR
35
Define the entire APN value in the field APN
part 1. If the defined value exceeds 16 char-
acters, it will be automatically cut and contin-
ued in the field APN part 2, and if exceeded
again, in the field APN part 3. The maximum
APN value is 48 characters, in all fields
together.
GPRS IP address
Key in the IP address that is used in GPRS
communication. As default, TWIG Web Finder
IP address
192.83.5.99 is used.
GPRS port number
A port number is required for GPRS communi-
cation. The value can be set between
0 ...
65535 . As default, TWIG Web Finder service
port
8484 is used.
GPRS DNS 1-2
Some GPRS networks require that primary
domain name server (DNS1) is specified.
Define the DNS as an IP address. Maximum
length for DNS1 name is 16 characters.
Default value for DNS1 is
127.0.0.1 and for
DNS2
127.0.0.2 (TWIG Web Finder).
GPRS user name
If the GPRS network in use requires a user
name for GPRS log-in, define the name here.
GPRS password
If the GPRS network in use requires a pass-
word for GPRS log-in, define the word here.
GPRS international roaming blocking
If international roaming block is set to YES ,
GPRS connection cannot be used during inter-
national roaming. If the value is set to
NO ,
GPRS connection is available also during
international roaming.
Default value for international roaming block-
ing is
NO . The value is checked every time
when creating GPRS connection.
Heartbeat interval
Heartbeat messages are in use when your
device is connected to charger and connection