User`s manual

CONFIGURATING LOCATOR
33
Config 45: Locator hardware version
This field shows hardware version of your
Locator device:
0 = Device is equipped with basic memory.
1 = Device is equipped with extra memory.
2 = Device is equipped with accelerometer.
3 = Device is equipped with both extra
memory and accelerometer.
The field is read-only.
Config 46: MC55 HW revision
The hardware version of your device. The field
is read-only.
Config 47: MC55 IMEI number
The IMEI number of your device. The field is
read-only.
Config 48: Locator II FW revision
The software version of your device. The field
is read-only.
WHITE LIST NUMBERS
In the White
list, you can
restrict phone
numbers from
which voice
calls and com-
mands can be
received by
your Locator.
White L 1-16
and 17-32
You can define
up to 32 White
list numbers which can be any valid phone
numbers. When there is at least one stored
phone number, White list is activated.
Activated White list means that incoming
voice calls and commands are accepted only,
if they are received from the numbers in
White list. The authorization is done by com-
paring the last 7 digits of the sender’s phone
number to the corresponding digits of all your