User`s manual

CONFIGURATING LOCATOR
27
• Automatic answer is off, there are no num-
bers stored in White list: Incoming call is
rejected.
• Automatic answer is off, there are numbers
stored in White list: If the caller’s phone
number can be found in the White list, the
call is not answered but a location (!LOC)
message is sent to the caller. If the caller’s
number cannot be found in the list, the call
is rejected without sending location mes-
sage.
• Automatic answer is on, there are no num-
bers stored in White list: All incoming calls
will be answered.
• Automatic answer is on, there are some
numbers stored in White list: If the caller’s
number can be found in White list, the call is
answered. Otherwise the call is rejected
without sending a location message.
For more information about White list num-
bers, see
white list numbers on page 33 .
Config 10: Auto leaving from alarm mode
Auto leaving from alarm mode defines time
after which Locator automatically leaves the
alarm mode. When the time is full, alarm
mode is terminated, including possible ongo-
ing alarm calls.
Valid values for this field are between
00.30.00
(hh.mm.ss) and 23.59.59 (hh.mm.ss). Default
value is
01.00.00 (one hour).
Config 11: Max GPS search time
You can define for how long GPS is trying to
get a refreshed position after receiving a posi-
tion request. If the refreshed position is not
acquired within that time, Locator sends posi-
tion update using the previously stored posi-
tion. Valid values for GPS search time are
between:
00.02.00 ... 00.10.59 (hh.mm.ss).
Default value is
00.05.00 (five minutes).
Config 12: GPS update in basic mode
You can define how frequently GPS is updating
position while in basic mode. Time interval