User`s manual

CONFIGURATING LOCATOR
26
Config 6: SMSC number
SMCS number defines the SMS center number
used in SMS messaging. If no SMS center
number is defined in this setting, Locator
automatically reads the number in your SIM
card.
If you wish to define a number in the SMSC
number field, write the digits together without
blanks and special characters. If you wish to
use international phone numbers, write sign +
and the country code in front of the number.
Or use national phone numbers without + and
the country code.
Config 7: Ext. button status message
Defines whether status input is in use or not.
Set the value as following:
0 (zero) = No status input
1 = Turns alarm into STA1 message.
2 = Turns anchor alert into STA2 message.
3 = Alarm is turned into STA1 message and
anchor alert into STA2 message.
Config 8: Terminate voice call
Voice calls can be initiated by Locator under
specific circumstances.
Terminate voice call
defines time limit for those voice calls which
automatically answered by Locator. When the
limit is reached, the voice call will be closed
automatically. Available values for the time
limit are: 00.01.00... 00.59.00 (hh.mm.ss).
Default value is 00.10.00 (ten minutes).
Note that
Terminate voice call settings are taken
into use only if automatic voice call answering
is set to
YES . For more information, see config
9: voice call auto answer on page 26 .
Config 9: Voice call auto answer
You can define whether or not you wish Loca-
tor to answer automatically to incoming voice
calls. Default value for this field is
NO . If you
wish to set the automatic answer on, type
YES .
Answering voice calls depends on both the
automatic answer and White list settings: