User`s manual

CONFIGURATING LOCATOR
23
and press Connect . The connection between
Locator and PC is established, and existing
Locator settings are displayed in configuration
settings fields.
Opening and saving settings
Before opening and saving configuration set-
tings, make sure that the connection between
TWIG Locator and the PC is established in a
way described in
opening connection on page 21 .
To open existing configuration settings for
editing and saving, press the
Select EE button
to search for your TWIG Locator configuration
file. Then press
Read EE to open the settings
which are currently saved in Locator. If you
wish to open the settings file stored on your
computer, press
File Read EE . You can now edit
the settings as you wish.
You can configurate your Locator according to
your defined settings by pressing the
Program
EE
button. A progress bar displays the status
of the configuration update. If you want to
save the configuration settings to your PC,
press
File Write EE .
Device information
The Info box displays details on your Locator ,
including the IMEI (International Mobile
Equipment Identity) code as well as software
version and GSM module numbers.
Updating software
Updating software is done in the Firmware
field. Press Select FW to browse for the soft-
ware update file. Update your existing TWIG
Locator software by pressing
Program FW . A
progress bar displays the status of the updat-
ing process.
Configuration settings
You can open Locator configurator settings
from the top tab row of Locator software.
Click the desired tab, and the available set-
tings will open in the software main view.