User`s manual

TWIG LOCATOR FEATURES
20
You can select whether vertical or horizontal
orientation is used as a basis to which
changes in device orientation are compared.
To prevent false alarms, there is a short, con-
figurable time delay between detected orien-
tation shift and launching alert. During this
time the device waits for the original orienta-
tion to be restored. If this happens, alert is
not activated.
Note that man down alert feature is not in
use, when Locator is connected to charger.
STATUS INPUT
Status input feature converts external alarm
or anchor alert button, or both of them to
send ?STA message to the number defined in
Alarm number 1 field in configuration set-
tings. Note that any other function cannot be
active at the same time with status input.
For more information on defining status input,
see
config 7: ext. button status message on page 26 .
GPS TRACE
You can store your Locator’s GPS position
information. The trace can include up to 10
000 locations, which can be read in L2U.log
file.
For more information on storing GPS trace,
see
config 19: trace log save on page 29 .