User`s manual

TWIG LOCATOR FEATURES
17
VOICE CALLING
Voice calling enables you to listen to your
Locator. When a call starts, Locator’s micro-
phone is activated and you can listen to what
happens within microphone’s reach e.g. other
person’s speak. Note that there is no speaker
in Locator, so transmitting voices to Locator is
not possible.
A voice call can be initiated by Locator or a
partner. If the call is initiated by Locator, the
available phone numbers are defined in voice
call numbers. See
config 28-32: voice call
numbers on page 29 for more information.
If the call is coming from a partner, and auto-
matic answer is set off, the call is automati-
cally rejected. If the automatic answer is set
on, the phone number is automatically com-
pared to the phone numbers stored in White
list. If the number is stored in the list, or if
White list is empty, the call is accepted. For
more information about defining automatic
answer and White list, see
config 9: voice call
auto answer on page 26 and white list numbers on
page 33 .
G Series features
Locator G series devices include special fea-
tures for timing and using accelometer. These
features help you to preset activity of your
device.
Note that to use any timer functions, Locator
device must be turned on from power key and
let to power off automatically using the power
off timer. Turning off by pressing the power
key, cancels all timer functions. In that case,
the timer won’t activate even if configurated
timelines are met. For more information on
power off timer, see
config 36: power off delay on
page 31 .
Once the device is off, you can turn it nor-
mally on by using the power key. Power off
timer will turn it off automatically if the mode
is not changed to another mode e.g. by con-
necting charger.