Operating instructions

ManualsBrandsBenefon ManualsComputer equipmentTWIG CONFIGURATOR

TWIG PROTECTOR PRO

Quick Guide

TWIG Protector Pro protection device is designed to be your

personal "guardian angel" – intended for all areas of personal and

professional safety.

Instructed by simple icons, the device is especially suitable for

children and elderly people as well as for applications or situations

where simplicity and robustness is a must

Please refer to Your Service Provider for full details on how TWIG

device operates with Your Service.

Manufacturer:

Twig Com Ltd

Lairolantie 14,

24910 HALIKKO, FINLAND

web: www.twigcom.com

Publication number: YZ3500-01

Twig Com Ltd. declares that this mobile device, type TUP90EU, is in

compliance with the essential requirements and other relevant provisions

of Directive 1999/5/.

Information in this Quick Guide is subject to change without notice. Twig

Com Ltd. reserves the right to change or improve their products and to

make changes in the content without obligation to notify any person or

organization of such changes or improvements. Twig Com Ltd. is not

responsible for any loss of data, income or any consequential damage

whatsoever caused.

Some of the features described in this guide are optional and intended to

be purchased separately. For more information, please contact your

dealer. *Instructions are only guidelines. Please consult your system

provider for detailed instructions.

For more information, details and descriptions, including device

configuration and assortment of chargers and accessories, visit the web

site: www.twigcom.com.

WHAT TO DO FIRST

DOWNLOAD CONFIGURATION SOFTWARE, INSTRUCTIONS

AND DRIVERS FROM www.twigcom.com/

If possible turn off the PIN request from the SIM card. If not,

change the PIN code to 9999 or change the PIN code that is

programmed to Protector to same that is used in SIM card before

starting the phone. Changing the PIN code that unit automatically

uses, please refer to configuration guide and PC Configure

program.

INSERTING THE SIM CARD

1. Slide the micro-SIM card

to the holder from the hole

on the side of the unit

contacts in the SIM are

facing towards keypad and

the cut corner of the card

inward. Make sure the card

locks to holder. Do not use

force, as the SIM will go

to its place easily.

2. Push the SIM card all the

way in with e.g. another

SIM card or some small

stick. Do not use sharp or metal tools or objects!

3. Insert the rubber plug to the SIM holder hole.

The device is dust and water proof according to IP67. To

meet the requirements, the rubber plug must be inserted in

place correctly. If the plug is damaged it must be changed

immediately to maintain tightness and warranty.

INITIALIZING THE DEVICE

When you start using the device for the first time, you should

charge the battery first. Please note that the battery will reach

its full capacity only after two or three charging times.

POWER SUPPLY

-Mains charger with the charger adapter or charging cradle

-Li-Ion polymer battery is integrated into the unit. The battery

type and capacity may vary depending on the market area and

model of the unit in the sales package.

MAINS CHARGER

The mains charger should

only be used indoors. Make

sure that the voltage in the

country which you are

staying corresponds to the

voltage marked on the

charger. When charging, connect the mini USB connector to

mini USB connector in charging adapter or the charging cradle.

Twist the Charging adapter to the bottom of the phone from

keyboard side down, all the way until it clicks on its place on

back cover.

If placing to charging cradle, place

first the bottom towards the

charging pins in the cradle and the

let the top of the unit lie down.

CHARGING

The device controls the charging status, the battery temperature

and power supply during the charging operation. The ideal

temperature range for charging is +10°...+30°C. If charging the

battery above or below these temperatures the life of a battery may be

shortened. Also, the battery may not reach full capacity. Battery

charging is not allowed below +0°C or above +50°C

When charging the battery, about 70% of the battery capacity will be

charged quickly, the remaining 30% takes relatively more time. Also

note that humidity, temperature, age of the battery and currently used

features (e.g. the GPS) affect the charging time.

BATTERY CARE, MAINTENANCE AND DISPOSAL

The continuous operating time is less when using an old battery than a

new battery. When storing unit for a long time, it should be kept cool

and with fully charged battery in a dry place. Li-Ion batteries do not

contain heavy metals which can damage the environment. Batteries

should be disposed of according to the country-specific regulations.

ENVIRONMENTAL EFFECTS IN USAGE

SIGHT

The device must have an unobstructed view to satellites at any time. In

marginal conditions (e.g. when staying in surroundings with heavy tree

cover or in a shadow area in between base stations) GPS positioning

may not work properly.

The device can be used like a standard GSM phone with the limited

feature set. In some cases, the device can be built in clothes or special

vests. If the device is mounted somehow, it must be attached to the

surface so that the back of the device is facing up and the top of the

phone upwards to ensure proper functioning of the GPS and GSM.

The unit can be covered with thin low loss material such as plastic,

fibre glass or clothes, but not with metal. This is regarding

particularly to GSM and GPS antenna areas!

TEMPERATURE RANGES

-Usage: -20°C to +55°C, at temperatures below -20°C, or above

+55°C, the battery will not supply power and the device will shut down

to prevent damage. Upon warming up/cooling down, the device will

function properly again

-Charging: Battery must not be charged below °0. Likewise, charging

above +50 °C is prevented.

Summary of content (4 pages)

PAGE 1
TWIG PROTECTOR PRO Quick Guide TWIG Protector Pro protection device is designed to be your personal "guardian angel" – intended for all areas of personal and professional safety. Instructed by simple icons, the device is especially suitable for children and elderly people as well as for applications or situations where simplicity and robustness is a must Please refer to Your Service Provider for full details on how TWIG device operates with Your Service.
PAGE 2
USER INTERFACE GSM/GPRS NETWORK STATUS GSM is on STRAP HOLE GPRS is used for telematics EARPHONE GPRS is active for telematics GSM is roaming . Phone is using other than home network. Call and position transmissions are charged according to roaming agreements. Position transmissions may have been blocked automatically. Bars on top of the network status icon indicate the strength of the GSM network. The more bars the better the GSM network.
PAGE 3
played. "Post-emergency mode". The GSM operator´s name is replaced by the emergency symbol. While this notification is shown, the device can be tracked by emergency numbers, also emergency tone and display settings are kept on. This mode can be terminated manually, by pressing the END key. NETWORK EMERGENCY CALL (112, 911, 000, 999, 08 etc) Network emergency call query. Shown when the TWIG SOS button is pressed but making emergency cycle is NOT possible (e.g.
PAGE 4
CARE AND MAINTENANCE NOTE: The instructions below apply to the device, its accessories, batteries in use as well as batteries taken out of use. Dust and dirt may damage the moving parts of the device. Do not use or keep the device in dusty or dirty surroundings. -Do not open the device or battery by yourself or pierce holes in it. -Rough handling may break the circuitry inside the device. Do not drop, knock, twist or shake the device or its battery. -Keep the device dry.