Product Manual

ManualsBrandsBendPak ManualsAutomotiveFloorplate 2-Post Truck and Car Lift — 12,000-Lb. Capacity

2. From the Off Side Column insert the non-looped end

of the safety cable through the hole located to the right of

the Off Side safety weldment. (See Fig 8.3)

3. Route the cable over the sheave and route it towards

the baseplate safety sheave. (See Fig 8.4)

4. Route the cable through the baseplate’s safety sheave(s)

and across the oor towards the Power Side Column.

(See Fig 8.5 - 8.6)

5. Route the cable the same way as on the Power Side

going up the Column and over the safety cable sheave.

6. Route the cable over the top pin on the safety handle.

Insert the cable end through the hole on the threaded pin.

(See Fig 8.7)

Fig 8.3

Slip looped end

over bottom pin

Insert

non-looped end

of safety cable

through hole in

Column

Fig 8.4.

Route safety cable

over Off Side safety

sheave and down

towards Floorplate

NOTE: Column cut

away for clarity

Fig 8.5

Safety

Cable

NOTE: Column and carriage cut away for clarity

To Power Side Column

From Off Side Column

Fig 8.6

Safety

Cable

NOTE: Column and carriage cut away for clarity

Safety

Cable

Hairpin

Cotter

Off Side Safety

Weldment

Safety

Clevis

Torsion

Spring

Fig 8.2