Product Manual

STEP 19

(Spindle Speed Adjustment)

NOTE:

Ensure that the lathe is free of chips

and any metal shavings before opening

the Main Motor Cover

1. Disconnect lathe from the Power Source.

2. Open the Main Motor Cover.

3. Loosen the Motor Mount Bolt.

4. Raise the Belt Tensioner Handle Up to loosen the

belt tension. Flip the Belt Tensioner Handle Up to loosen

the belt tension.

5. Lift up on the motor then move Belt to the desired

Pulley set.

Inner Pulley Set 150 RPM

Outer Pulley Set 200 RPM

6. Lower Belt Tensioner Down.

7. Tighten Motor Mount Bolt.

8. Close the Cover.