Product Manual

P-9000LT/F Low-Rise Pit Lift 21 P/N 5900022 — Rev. A5 — February 2019
Set Up the Console and Attach the Power Unit
The Console comes unassembled from the factory.
Note: Some Consoles are occasionally shipped assembled. If you receive an assembled Console,
ignore the steps in the procedure that have already been done for you.
The included Hydraulic Lines require the Console to be within 30 inches of the Lift.
Tip If you want to set up the Console further than 30 inches from your Lift, you will need to
get Hydraulic Lines that are long enough to reach the Lift from the desired location.
You may be able to obtain these lines from the local hydraulics shop, once you know
how long you need them. You will also need longer Air Lines.
The following procedure includes instructions for anchoring the Console into place. If you prefer, you
can defer anchoring the Console.
Why would you defer anchoring the Console for later? Anchoring the Console is a pretty permanent
decision. Delaying the anchoring gives you a chance to evaluate how well you like the your first choice
for the location of the Console. It is easier to change the Console location later if it is not anchored.
When you want to anchor the Console into place, return to this section and follow the instructions
starting with Step 8.