Product Manual

31
POST-INSTALLATION CHECK-OFF
n Columns properly shimmed and stable
n Anchor Bolts tightened
n Pivot / Sheave Pins properly attached
n Electric power supply confirmed
n Cables adjusted properly
n Safety Locks functioning properly
n Check for hydraulic leaks
n Oil level
n Lubrication of critical components
n Check for overhead obstructions
n All Screws, Bolts, and Pins securely fastened
n Surrounding area clean
n Operation, Maintenance and Safety Manuals
on site.
n Perform an Operational Test with a typical vehicle
STEP 19
(Operation Instructions)
OWNER/EMPLOYER RESPONSIBILITIES
The Owner/Employer:
• Shall ensure that lift operators are qualied and that
they are trained in the safe use and operation of the lift
using the manufacturer’s operating instructions; ALI/
SM01-1, ALI Lifting it Right safety manual; ALI/ST-90
ALI Safety Tips card; ANSI/ALI ALOIM-2000, American
National Standard for Automotive Lifts-Safety Require-
ments for Operation, Inspection and Maintenance; ALI/
WL Series, ALI Uniform Warning Label Decals/Placards;
and in the case of frame engaging lifts, ALI/LP-GUIDE,
Vehicle
Lifting Points/Quick Reference Guide for Frame Engaging
Lifts.
• Shall establish procedures to periodically inspect the
lift in accordance with the lift manufacturer’s instructions
or ANSI/ALI ALOIM-2000, American National Standard
for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer shall
ensure that lift inspectors are qualied and that they are
adequately trained in the inspection of the lift.
• Shall establish procedures to periodically maintain the
lift in accordance with the lift manufacturer’s instructions
or ANSI/ALI ALOIM-2000, American National Standard
for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer shall
ensure that lift maintenance personnel are qualied and
that they are adequately trained in the maintenance of
the lift.
• Shall maintain the periodic inspection and maintenance
records recommended by the manufacturer or ANSI/ALI
ALOIM-2000, American National Standard for Automotive
Lifts-Safety Requirements for Operation, Inspection and
Maintenance.
• Shall display the lift manufacturer’s operating
instructions; ALI/SM 93-1, ALI Lifting It Right safety
manual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI
ALOIM-2000, American National Standard for Automotive
Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and in the case of frame engaging lifts, ALI/
LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide
for Frame Engaging Lifts; in a conspicuous location in the
lift area convenient to the operator.
• Shall provide necessary lockout/tagout means for
energy sources per ANSI Z244.1-1982 (R1993), Safety
Requirements for the Lockout/Tagout of Energy Sources,
before beginning any lift repairs.
• Shall not modify the lift in any manner without the prior
written consent of the manufacturer.
STEP 20
(Lift Operation Safety)
• DAILY inspect your lift. Never operate if it malfunctions
or if it has broken or damaged parts. Use only qualied
TO AVOID PERSONAL INJURY AND/OR PROPERTY
DAMAGE, PERMIT ONLY TRAINED PERSONNEL TO
OPERATE LIFT. AFTER REVIEWING THESE
INSTRUCTIONS, PRACTICE USING LIFT CONTROLS
BY RUNNING THE LIFT THROUGH A FEW UNLOADED
CYCLES BEFORE LOADING VEHICLE ON LIFT.
NEVER RAISE JUST ONE END, ONE CORNER,
OR ONE SIDE OF VEHICLE.