Product Manual

10
A
B
C
X
X
K
J
I
Diagonal Measurements
Must Be Equal*
Note: Power Unit can be located at either “X” location.
H
E
FG
D
FLOOR PLAN
*IMPORTANT NOTE*
Check Diagonal Measurements
To Ensure Square Layout Diagonal Measurements Must Be Equal.
MODEL HD-9 HD-9XW HD-9XL
Lifting Capacity 9,000 lbs. / 4082 Kg. 9,000 lbs. / 4082 Kg. 9,000 lbs. / 4082 Kg.
Max capacity / front axle 4,500 lbs. / 2,041 kg 4,500 lbs. / 2,041 kg 4,500 lbs. / 2,041 kg
Max capacity / rear axle 4,500 lbs. / 2,041 kg 4,500 lbs. / 2,041 kg 4,500 lbs. / 2,041 kg
A - Overall Width 110-1/4” / 2,800 mm 110-1/4” / 2,800 mm 110-1/4” / 2,800 mm
B - Outside Length 174” / 4,420 mm 198” / 5,029 mm 198” / 5,029 mm
C - Overall Length 200” / 5,080 mm 224” / 5,690 mm 224” / 5,690 mm
D - Height of Columns 88” / 2,235 mm 100” / 2,540 mm 88” / 2,235 mm
E - Min. Runway Height 4-1/2” / 114 mm 4-1/2” / 114 mm 4-1/2” / 114 mm
F - Max. Rise 70” / 1,778 mm 82” / 2,083 mm 70” / 1,778 mm
G - Max Lifting Height 74-1/2” / 1,892mm 86-1/2” / 2,197 mm 74-1/2” / 1,892mm
H - Width Between Columns 100-1/4” / 2,555 mm 100-1/4” / 2,555 mm 100-1/4” / 2,555 mm
I - Runway Width 19” / 483 mm 19” / 483 mm 19” / 483 mm
J - Width Between Runways(*)
Narrow and Wide Settings
37-1/2” - 44-3/8”
952 mm - 1127 mm
37-1/2” - 44-3/8”
952 mm - 1127 mm
37-1/2” - 44-3/8”
952 mm - 1127 mm
K - Runway Centerline(*)
Narrow and Wide Settings
56-1/2” - 63-3/8”
1435 mm - 1610 mm
56-1/2” - 63-3/8”
1435 mm - 1610 mm
56-1/2” - 63-3/8”
1435 mm - 1610 mm
Min. wheelbase @ rated capac-
ity:
115”/ 2921 mm 135”/ 3429 mm 135”/ 3429 mm
Min. wheelbase @ 75% capacity 100” / 2540 mm 115” / 2921 mm 115” / 2921 mm
Min. wheelbase @ 50% capacity 85” / 2159 mm 95” / 2413 mm 95” / 2413 mm
Min. wheelbase @ 25% capacity 70” / 1778 mm 80” / 2032 mm 80” / 2032 mm
Locking Positions 12 15 12
Lock Spacing Every 4” / 102 mm Every 4” / 102 mm Every 4” / 102 mm
Lifting Time 45 Seconds 50 Seconds 45 Seconds
Standard Motor (**) 220 VAC / 60Hz 1 Ph 220 VAC / 60Hz 1 Ph 220 VAC / 60Hz 1 Ph
Emission sound pressure at Operator Position < 70 dB(A)
* This dimension may be limited with the addition of rolling jacks. See Rolling Jack Specications on Separate page.
** For CE compliant countries see errata sheet included with control panel.
The design, material and specications are subject to change without notice.