Use and Care Manual

HD-9 Series Four-Post Lifts 3 P/N 5900123 — Rev. M1 — March 2020
Table of Contents
Introduction 3 Operation 68
Shipping Information 4 Maintenance 71
Safety Considerations 4 Troubleshooting 73
Components 6
Wiring Diagrams 74
Specifications 8 Labels 76
FAQs 11 Parts Drawings 79
Installation Checklist 12 ALI Store 91
Installation 13
Introduction
This manual describes the following ALI- and CE-certified Four-Post Lifts:
• HD-9ST. Four-Post Lift with an overall width of 100.25" (8.4 feet), raising Vehicles up to 9,000 lbs
(4,082 kg).
• HD-9STX. Has the same overall width as the HD-9ST but with
higher rise and extended
length
.
• HD-9. Four-Post Lift with an overall width of 110.25" (9.2 feet), raising Vehicles up to 9,000 lbs
(4,082 kg).
• HD-9XL. Has the same overall width as the HD-9, but with
extended length .
• HD-9XW. Has the same overall width as the HD-9, but with
higher rise and extended
length
.
This manual is mandatory reading for all users of the HD-9 Series, including anyone who installs, uses,
maintains, repairs, or wants to know more about them.
⚠ DANGER Use care when installing, operating, maintaining, or repairing this equipment; failure to
do so could result in property damage, product damage, injury, or (in very rare cases)
death. Make sure only authorized personnel operate this equipment. All repairs must
be performed by an authorized technician. Do not make modifications to the unit; this
voids the warranty and increases the chances of injury or property damage. Make
sure to read and follow the instructions in this manual and on the labels on the unit.
Keep this manual on or near the equipment so that anyone who uses or services it can read it. If you
are having issues, refer to the Troubleshooting section of this manual for assistance.
Technical support and service is available from your dealer, on the Web at bendpak.com/support,
by email at [e-mail], or by phone at [phone], extension 196. You may
also contact BendPak for parts replacement information at [phone], extension 191; please
have the model and serial number of your unit available.