Full Product Manual

MD-6XP Mid-Rise Scissor Lift 23 P/N 5900108Rev. F2 April 2021
WARNING Always position the Lift Arms and Pads under the Vehicle so that they are directly
under the manufacturers lifting points. If you are unsure of the Lifting Points
location, consult Vehicle Lifting Points for Frame Engaging Lifts, which is available
on the ALI website. (www.autolift.org/ali-store) Keep loads centered and
balanced.
Each time before
you raise a Vehicle on your Lift:
Check the Lift. Walk all the way around the Lift, checking for any missing, heavily worn, or
damaged parts. Do not operate the Lift if you find any issues; instead, take it out of service, then
contact your dealer, email support@bendpak.com
, or call (800) 253-2363.
Check the area. Keep the area around and under the Lift clean and free of obstructions;
anything that could cause a problem. Do not forget to check
above
the Lift. If you find an
obstruction, move it out of the way.
Check the operators. Make sure everyone who is going to operate the Lift has been trained in
its use, has read the labels on the unit, and has read the manual. Only the operator at the Controls
should be within 30 feet of the Lift while it is moving. Do not allow children to operate the Lift. Do