Full Product Manual
Table Of Contents
- MD-6XP Mid Rise Lift
- Table of Contents
- Introduction
- Shipping Information
- Safety Considerations
- Components
- Specifications
- Installation Checklist
- Installation
- Safety Rules
- Tools
- Select a Site
- Planning for Electrical Work (220 VAC only)
- Clearance Around the Lift
- Unloading and Unpacking
- Assemble the Portable Stand
- Attach the Power Unit to the Portable Stand
- Set up the Tow Cart
- Hydraulic Fluid Contamination
- About Thread Sealants
- Connect the Hydraulic Hoses
- Install the Lift Arms
- Connect the Power Unit
- Install a Thermal Disconnect Switch
- Fill the Hydraulic Fluid Reservoir
- Test the Lift
- Final Checklist Before Operation
- Operation
- Maintenance
- Troubleshooting
- Wiring Diagrams
- Labels
- Parts Diagrams
- Maintenance Log
- Maintenance Log
- Automotive Lift Institute (ALI) Store
MD-6XP Mid-Rise Scissor Lift 12 P/N 5900108 — Rev. F2 — April 2021
Assemble the Portable Stand
The Portable Stand allows you to easily move the Power Unit to a location near the Lift.
Assemble the Portable Stand as shown below.
Item No. Part Number Description Qty
1 5601407 Low Rise Power Unit Stand 1
2 5737141 Low Rise Power Unit Extension Plate 1
3 5716192 Polyurethane Wheel 2
4 5545026 Washer M6 x Ø12 SL 2
5 5530027 HHB M6 x 1.0 x 35 2
6 5535357 Nut M6 x 1.0 NL 2
7 5545202 Washer M8 x Ø 15 SL 2
8 5530304 HHB M8 x 1.25 x 20 2
9 5535001 Nut M8 x 1.25 NL 2