Specification

Model HD-7P HD-7W
Style Wide Width / High Lift Wide Width / High Lift
SKU# 5175510 5175120
Lifting Capacity 7,000 lbs. (3,175 kg) 7,000 lbs. (3,175 kg)
A - Min. Runway Height 4.5” (114 mm) 4.5” (114 mm)
B - Max. Rise 82” (2,083 mm) 82” (2,083 mm)
C - Max. Lifting Height 86.5” (2,197 mm) 86.5” (2,197 mm)
D - Overall Width 100.25” (2,546 mm) 110.25” (2,800 mm)
E - Outside Length 174” (4,420 mm) 174” (4,420 mm)
F - Overall Length 200” (5,080 mm) 200” (5,080 mm)
G - Height of Columns 100” (2,540 mm) 100” (2,540 mm)
H - Width Between Columns 90.25” (2,292mm) 100.25” (2,555 mm)
I - Drive-Thru Clearance 76.5" (1,943 mm) 86.5" (2,197 mm)
J - Runway Width 19" (483 mm) 19" (483 mm)
K - Length of Runways 164" (4,166 mm) 164" (4,166 mm)
L - Width Between Runways 37.5" (952 mm) 37.5" (952 mm) - 44-3/8" (1,127 mm)
M - Runway Centerline 56.5" (1,435 mm) 56.5" (1,435 mm) - 63-3/8" (1,610 mm)
N - Outside Edge of Runways 75.5" (1,918 mm) 75.5" (1,918 mm) - 82-3/8" (2,092 mm)
Min Wheelbase @ Capacity 115” (2,921 mm) 115” (2,921 mm)
Min Wheelbase @ 75% Capacity 100” (2,540 mm) 100” (2,540 mm)
Min Wheelbase @ 50% Capacity 85” (2,159 mm) 85” (2,159 mm)
Min Wheelbase @ 25% Capacity 70” (1,778 mm) 70” (1,778 mm)
Time to Full Rise 35 sec 35 sec
Locking Positions 15 15
Lock Spacing every 4” (102 mm) every 4” (102 mm)
Motor 220 VAC / 60 Hz / 1 Ph 220 VAC / 60 Hz / 1 Ph
© 2019 BendPak Inc. All rights reserved.
Specications
1645 Lemonwood Drive, Santa Paula, CA 93060 USA • Toll-free 1-800-253-2363 • Fax [phone]
Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult
www.autolift.org for a complete list or contact BendPak via [e-mail].