Product Brochure
Table Of Contents
- HD-7P and HD-7W Manual
- Table of Contents
- Introduction
- Shipping Information
- Safety Considerations
- Components
- Specifications
- Frequently Asked Questions
- Installation Checklist
- Installation
- Being Safe
- Tools
- Planning for Electrical Work
- Selecting an Approach Direction
- Selecting a Power Post Location
- Checking Clearances
- Selecting a Location
- Unloading and Unpacking
- Creating Chalk Line Guides
- Moving the Posts into Position
- Installing the Crosstubes
- About Safety Locks
- Installing the Ladders and Top Cap
- Raising the Crosstubes
- Securing the Ladders
- Removing Sheaves
- Installing the Runways
- Installing the First End of the Flex Tube
- Routing the Lifting Cables
- Working with Compression Fittings and Tubing
- Installing the Air Lines
- Installing the Hydraulic Hose
- Installing the Return Line
- Installing the Power Unit
- Filling the Hydraulic Fluid Reservoir
- Installing the Second End of the Flex Tube
- Installing the Pushbutton Air Valve
- Connecting the Return Line
- Connecting the Hydraulic Hose
- Contacting the Electrician
- Connecting to a Power Source
- Installing a Power Disconnect Switch
- Installing a Thermal Disconnect Switch
- About Effective Embedment
- Anchoring the Posts
- Final Leveling
- Installing Accessories
- Lubricating the Lift
- Performing an Operational Test
- Reviewing the Final Checklist
- Operation
- Maintenance
- Troubleshooting
- Wiring Diagrams
- Labels
- Parts Drawings
- Automotive Lift Institute (ALI) Store
- Maintenance Log
HD-7P / HD-7W Four-Post Lifts 7 P/N 5900041 — Rev. M — July 2019
Drawing not necessarily to scale. Some components not shown. Crosstube Windows for the
Crosstube on the left not visible in this view.
Accessories
• Rolling Jack(s). Optional product that raises wheels of the Vehicle on the Lift off the Runway,
making it much easier to perform certain jobs while the Vehicle is still on the Lift. Refer to the
Rolling Jack page on the BendPak website for more information.
• Air Line Kit. Optional product that provides the infrastructure to get air to your Rolling Jacks,
conveniently routing the air lines under the Lift’s Runways. Refer to the Air Line Kit page on
the BendPak website for more information.
• WSA-100 Utility Station. Optional product that adds air and electric outlets to your Lift. Refer
to the WSA-100 Utility Station page on the BendPak website for more information.
• Aluminum Decks. Optional set of two Aluminum Decks let you store items, including
motorcycles and ATVs, on your Lift. Refer to the Aluminum Deck page on the BendPak
website for more information.